Do you have a question?
Please contact us via email, contact form or phone
+49-7243-2167-23 (head office, Germany) or directly your local contact.
Special note
This knowledge base is updated regularly. If you need an information and don't find it here, please don't hesitate to contact us! Of course, we're also to your disposal at the phone:
+49 7243 2167-0
Quick overview of trigger I/Os of VC Smart Cameras
| VC20xx | VC40xx | VCSBC4018 | |
| IN | 3 - 5 V | 3 - 5 V | 0 - 0.7 V low 1.5 - 3.3 V high |
| OUT | Max. 7 V, 50 mA | Max. 7 V, 50 mA | Max. 3 V, 8 mA |
| Optocoupler | IN: yes OUT: no |
IN: no OUT: no |
IN: no OUT: no |
| Resistor | IN: 330 limiting resistor OUT: none |
IN: none OUT: none |
IN: 4K7 pull-up resistor OUT: none |
| Reverse voltage protection | IN: shunt diode OUT: none |
IN: none OUT: none |
IN: none OUT: none |
| Pin assignment 1 (green) 2 (brown) 3 (white) 4 (pink) 5 (grey) 6 yellow) |
Trig IN - 5 V OUT GND Keypad IN Trig OUT Trig IN + |
V24 OUT 5 V OUT GND V24 IN Trig OUT Trig IN |