|
- 1GHz DSP Power with 8000 MIPS
- framerate 10 fps (20fps with 2 times
binning)
- jitter-free high speed image acquisition
- high speed shutter till 5µs
- 100 MBit Ethernet Interface
|
|
VC4472
|
|
|
| The VC4472 is one of the world's fastest and most excellent smart cameras with computational power of 8000 MIPS rivalling a 7.2 GHz Pentium. It has 64 MB DRAM, 4 MB Flash EPROM for program and data storage (Expanded by the standard 512 MB SD card inside). |
| It can acquire full frame 1600 x 1200 pixels at 10 frames per second! |
| The own internal operating system ’’VCRT’’ of the VC4472 is multitasking. This means that multiple processes can be executed in parallel. |
| The camera has also a High Speed Trigger input with absolute constant capture delay, which allows absolutely jitter-free image acquisition even at very high speed processes. |
| And whereas a standard progressive scan camera gets a trigger, starts exposure and then reads out the pixel data, the VC4472 has optimized the image acquisition process so that exposure, readout and the image processing can be done in parallel. |
| It has an 8 bit colour overlay which can operate in opaque or semi-transparent mode so that you can block out or still see the underlying image. |
| All Vision Components cameras are built for industrial applications. They are insensitive to shock and vibration, and have multiple I/O lines for direct control of external equipment. For more complex control tasks, they can easily be interfaced to a PLC. |
| |
|
Specifications
|
VC4472
|
|
Sensor:
|
1/1.8", 1550 (H) x 1200 (V) Pixel
|
|
Shutter:
|
High-speed: up to 5 µsec
Low-speed: up to 12,5 sec adjustable integration time
|
|
Integration:
|
Full Frame Progressive Scan
|
|
Frame rate:
|
10 fps (20 fps with 2 times binning)
|
|
Acquisition:
|
Asynchronous, program controlled or external trigger, full frame
|
|
A/D conversion:
|
1 x 40 MHz / 10 Bit
|
|
Processor:
|
8000 MIPS, 1 GHz Texas
Instruments TMS320C64xx
|
|
Image display:
|
B&W or pseudocolor from 3x8 bit RGB lookup table
|
|
Image/Data memory:
|
64 MBytes SDRAM
|
|
Flash memory:
|
4 MBytes Flash EPROM (non volatile memory) for programs and data, programmable in the system
|
|
Dig. I/O’s:
|
4 inputs / 4 outputs optically decoupled 24V, outputs 4 x 500mA
|
|
Interfaces:
|
RS232 up to 115.200 Baud max.
and
100Mbit Ethernet
|
|
Video output:
|
UXGA monitor 1600x1200
|
|
Supply voltage:
|
24V +/-20% DC, max. 300 mA
|
|
Electrical connections:
|
I/O (DC IN, PLC, 12-pin), V24 (6-pin), Trig (Trigger/keypad, 6-pin), VGA Out (10-pin)
|
|
Dimensions:
|
ca. 110 x 50 x 35 mm, ca. 400 gr.
|
|
(No liability is assumed for possible errors !)
back to the Smart Camera overview...
|
VC Optimum VC4472
