• DSP Power with 3200 MIPS
• framerate with 2592 x 1499 pixel 11,6 fps (skipping binning = 102 fps)
• jitter-free high speed image acquisition
• 100 MBit Ethernet Interface

VCSBC4012

The new 5 mega pixel single board camera with a CMOS sensor is an extremely fast intelligent single board camera and one of the fastest intelligent cameras all over with a computational power of 3200 MIPS rivalling a 2.6 GHz Pentium. It has 64 MB DRAM, 4 MB Flash EPROM for program and data storage and can acquire full frame 2592 x 1944 pixels at 11,6 frames per second! 

The own internal operating system ’’VCRT’’ of the VCSBC4012 is multitasking. This means that user interface commands can execute in parallel without stopping the inspection process. 

It has a video output onto a PC via 100 Mbit Ethernet interface and also a High-Speed Trigger input with absolute constant capture delay, which allows absolutely jitterfree image acquisition even at very high-speed processes. 

The VCSBC4012 is especially for OEM application with high quantities the best and most cost efficient solution. The VCSBC4012 offers thus the most inexpensive entrance into the world of the high performance intelligent cameras.

All Vision Components cameras are built for industrial applications. They are insensitive to shock and vibration, and have multiple I/O lines for direct control of external equipment. For more complex control tasks, they can easily be interfaced to a PLC. 

Specifications

VCSBC4012 (Also available as colour version!)

CMOS Sensor:

1/2.5", 2595(H) x 1944(V) Pixel

Shutter:

High-speed: up to 15 µs, 45µs, 75µs(in steps of 30 µs)
Low-speed: up to 30 sec. adjustable integration time

Integration

ERS/GRR*

Frame rate:

11,6 fps

Acquisition:

asynchronous, program-controlled, or triggered externally, full-frame, acquisition jitter free

A/D Conversion:

1 x 80 MHz / 12 Bit

Processor:

3200 MIPS, 400 MHz Texas Instruments TMS320C64xx

Video output:

Via 100Mbit Ethernet onto PC

Image-/data memory:

64 MBytes SDRAM

Flash memory:

4 MBytes Flash EPROM (non volatile memory) for programs and data, programmable in the system

Dig. I/O’s:

2 inputs / 4 outputs open collector 24V, Outputs 4 x 400mA, TTL I/O 4 In- and 4 outputs, 1 picture trigger input, 1 flash trigger output

Interface:

Ethernet 100 MBit TCP/IP

Supply voltage:

24V +/-20% DC, max. 300 mA

Electrical connections:

I/O (DC IN, PLC, 12-pin), Ethernet (8-pin), TTL I/O (20-pin), LED Lighting plug (4-pin)

Dimensions:

Approx. 40 x 120 mm