• DSP Power with 3200 MIPS
• framerate 32 fps with 640 x 480 pixel
• jitter-free high speed image acquisition
• 100 MBit Ethernet Interface

VCSBC4018

The VCSBC4018 is an extremely fast intelligent single board camera and one of the fastest intelligent cameras all over with a computational power of 3200 MIPS rivalling a 2.6 GHZ Pentium. It has 32 MB DRAM, 4 MB Flash EPROM for program and data storage and can acquire full frame 640 x 480 pixels at 32 frames per second! 

The own internal operating system ’’VCRT’’ of the VCSBC4018 is multitasking. This means that user interface commands can execute in parallel without stopping the inspection process. 

It has a video output onto a PC via 100MBit Ethernet interface and also a High Speed Trigger input with absolute constant capture delay, which allows absolutely jitter-free image acquisition even at very high speed processes. 

And whereas a standard progressive scan camera gets a trigger, starts exposure and then reads out the pixel data, the VCSBC4018 has optimized the image acquisition process so that exposure and readout are in parallel. 

The VCSBC4018 offers thus an extremely inexpensive entrance into the world of the high performance intelligent cameras. 

All Vision Components cameras are built for industrial applications. They are insensitive to shock and vibration, and have multiple I/O lines for direct control of external equipment. For more complex control tasks, they can easily be interfaced to a PLC. 

Specifications

VCSBC4018

Sensor:

1/3", 640(H) x 480(V) Pixel

Shutter:

High-speed: up to 36,2 µsec in steps of 62,4 µsec Low-speed: up to 2 sec adjustable integration time

Integration:

Full Frame Progressive Scan

Frame rate:

  32fps

Acquisition:

asynchronous, program-controlled, or triggered externally, full-frame, Acquisition jitter free

A/D Conversion:

1 x 12.5 MHz / 10 Bit

Processor:

3200 MIPS, 400 MHz Texas Instruments TMS320C64xx

Video output:

Via 100Mbit Ethernet onto PC

Image-/data memory:

32 MBytes SDRAM

Flash memory:

4 MBytes Flash EPROM (non volatile memory) for programs and data, programmable in the system

Dig. I/O’s:

2 inputs / 4 outputs optically decoupled 24V, Outputs 4 x 400mA, TTL I/O 4 In- and 4 outputs, 1 picture trigger input, 1 flash trigger output

Interface:

Ethernet 100 MBit TCP/IP

Supply voltage:

24V +/-20% DC, max. 300 mA

Electrical connections:

I/O (DC IN, PLC, 12-pin), Ethernet (8-pin), TTL I/O (20-pin), LED Lighting plug (4-pin)

Dimensions:

Approx. 60 x 80 x 35 mm