25 Years of Pioneering:
VC company founder Michael Engel interviewed

Michael Engel is the inventor of the intelligent camera for industrial series production. When he founded Vision Components with this product in 1996, he had already built up a company in the field of industrial image processing, led it to success and sold it. In this interview, he talks about 25 years of Vision Components—and the next revolution in vision sensor design.

Mr. Engel, you founded Vision Components
25 years ago. How did it come about?

Image processing has always been my profession and the beginnings are now over 30 years ago. At that time, the subject had a rather bad reputation: the technology was too expensive and complex. In my first company, Engel und Stiefvater, we showed that it could work after all. 

We developed systems for quality control in industry, based on processors like the Motorola 68000, the first programmable 32-bit computer. Back then, these were already precursors of today's embedded systems, but they were huge in comparison: our solutions were as big as the tower PCs of the 1990s, and each installation was a complex project with high costs.

Michael Engel - Company founder Vision Components

"There must be a better way, I thought to myself at the time. This idea of an intelligent camera for industry laid the foundation for Vision Components."

What exactly was your idea back then?
And how did you implement it?

Our goal was to create a significantly lower cost offering that could be used easily and universally. Based on a digital signal processor (DSP), we wanted to create a system that was as compact as possible and allowed image capture and playback to be controlled by software. This resulted in the VC11 - Vision Components' first product and the very first intelligent camera for series use in industry. We focused on developing and supplying the hardware and worked with partners for system integration, just as we do today.

At the time, I assembled the first 250 cameras myself to get a feel for the effort involved and the potential production costs. The VC11 was a tremendous success; in fact, the camera could do almost everything at that time that today's smart camera for industry can do.

It's now 25 years since you invented the first intelligent camera for industry.
What has happened since then? And what is the next revolution?

 

board camera VC picoSmart

The VC11 was an enormous step forward for many users, from a large and complex system to a compact camera with integrated image analysis. Many manufacturers of vision sensors have used our electronics and components as a basis for their own developments or have developed corresponding electronics themselves. Now we want to go one step further: With VC picoSmart we have just recently presented the smallest embedded vision system in the world. 

The sensor and image analysis unit are completely integrated on a circuit board that is just the size of a postage stamp. This technological advance is comparable to the leap from tower-sized systems to intelligent cameras 25 years ago. With the VC picoSmart, we are once again addressing OEM manufacturers of vision sensors and offering them a cost-effective component that can save them time and risk when designing their application-specific sensors.

Mr. Engel, thank you very much.
On a personal note: could you also tell us how you see your personal future?

Well, I don't feel any urge to retire. Technical development is extremely exciting and it gives me great pleasure to continue actively shaping it in the years to come.

About the Author

Jan-Erik Schmitt

schmitt@vision-compoqrptnencrts.com

Any question? Contact us, it's our pleasure to help you!

Jan-Erik Schmitt - Vice President of Sales - Vision Components

Your contact for international sales

Sales international
Jan-Erik Schmitt
Vice President of Sales

P +49 7243 2167-23
M +49 176 63 31 85 08
sctte+hmrfitt@5nxdevisigtizion-compozzenents.comavp
Xing  LinkedIn

Arrange an online meeting with me.

GET APPOINTMENT
Endre Tóth - Sales North and South Amercia - Vision Components

Your contact in Americas

Sales Americas
Endre Tóth
Director of Business Development
Vision Components US Office

P +1 603 598-2588
M +1 603 55 77 122
etoth@txuvisioubn-co+ltcmponbmtents.uyvcomexxhu
LinkedIn

Arrange an online meeting with me.

GET APPOINTMENT
Sven Klette-Matzat - Sales - OEM Solutions - Vision Components

Your contact for Europe

Sales Europe
Sven Klette-Matzat
Sales Manager/OEM Solutions

P +49 7243 2167-24
M + 49 176 83 04 07 23
svroben.klj9ettjobe-matzat@vimazmsiomwn-comp/3qlonents.com
Xing  LinkedIn

Arrange an online meeting with me.

GET APPOINTMENT
Shinobu Minobe: Sales Japan, Vision Components Japan Office

Your contact in Japan

Sales Japan
Shinobu Minobe
Director of Business Development
Vision Components Japan Office

T +81 (48) 299-4798
M +81 (80) 3023-2314
minqpzl/obi+hoe@visiomhfan-components.jp

Arrange an online meeting with me.

GET APPOINTMENT
Andreas Beising - Sales Asia and Middle East  - Vision Components

Your contact for Asia (excl. Japan) & Middle East

Sales Asia (excl. Japan) & Middle East
Andreas Beising
Director of Business Development

M +49 172 72 59 176
M +971 56 11 56 577
beisinbhg@vv1upqision-c638eomponents2t.com
LinkedIn

Arrange an online meeting with me.

GET APPOINTMENT

We use cookies to grant the best experience with our website. By using this website you accept the usage of cookies.